Improves Picture and Sound Quality, Monitors Incoming Line Voltage, and Reduces Cross-Contamination Between Components.

Improves Picture and Sound Quality

Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.


Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax™ patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.


Reduces Cross-Contamination Between Components

The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

Panamax M5300-PM

    • Line Voltage120 (Volts)
    • BlueBOLT EnabledNo
    • Power Factor TechnologyNo
    • Number of Outlets11
    • Number of Isolated Banks5
    • Outlet Descriptions

      1 (always on, linearly filtered outlet, front panel)

      4 (always on, linearly filtered outlets, rear panel)

      4 (switchable, linearly filtered outlets, rear panel)

      2 (switchable high current outlets, rear panel)


    • Rack MountableYes
    • Rack Ears IncludedYes
    • Front Panel Meter(s)1 voltmeter, 1 Ammeter
    • Front Media Light(s)No
    • ControlOn/Off control of switched outlets through front panel power button or rear panel DC trigger.
    • Voltage RegulationNo
    • CompliancecCSAus
    • USB Charging1 front panel USB charger
    • Low Voltage Trigger12 V, In/Out
    • AC Power Cord10 ft. detachable
    • Dimensions17" W x 12.75" D x 3.5" H, (4.1" Including feet)
    • Weight12.8 lbs
    • AC Protection TechnologyProtect or Disconnect
      Automatic Voltage Monitoring
      L-N, L-G, N-G Protection Modes
      Thermal Fusing
    • Automatic Voltage ShutoffYes
    • Under-Voltage Shutoff90 VAC ± 2 VAC
    • Over-Voltage Shutoff142 VAC ± 8 VAC
    • Maximum Current Rating15 (Amps)
    • Initial Clamping Level200V Peak

    AC Protection

    • Filtration TechnologyLiFT
    • Filtration Rating

      Bank 1: Up to -86 db (100 KHz _ 2 MHz)

      Bank 2: Up to -91 db (100 KHz _ 2 MHz)

      Bank 3: Up to -81 db (100 KHz _ 2 MHz)

      Bank 4: Up to -100 db (100 KHz _ 2 MHz)

      Bank 5, High Current Outlets: Up to -81 db (100 KHz _ 2 MHz)