While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.

Features:

  • EQ switch for use with different subwoofers
  • Selectable signal-sensing or voltage triggered auto-on/off circuit
  • 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms
  • Line and speaker level inputs
  • Rack ears included

Klipsch RSA-500 SUBWOOFER AMPLIFIER

C$1,299.00Price
  • RATED POWER OUTPUT 2 x 100 Watts (Stereo) into 4 ohm

    Load 200 Watts (BTL) into 8 ohm

    Load TOTAL HARMONIC DISTORTION (THD) 100dB CROSSOVER FREQ. RESPONSE @ Min position 18.5-55.2Hz 40Hz/0dB ref @ Max position 18.2-168.8Hz 40Hz/0dB ref AUTO TURN ON SENSITIVITY 5mV +/-2mV Full Range 1KHz 5mV +/-2mV Input 50 Hz DELAY ”OFF“ TIME 8 minutes LINE OUT FREQ. RESPONSE 20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref INPUT IMPEDANCE LINE IN 9.2K ohm +/-5% MAX. NOISE+HUM VOL MAX <1.0mV, Input Shorted POWER REQUIREMENT 115V 60Hz or 220 - 240V 50Hz DIMENSIONS 5.5” (140mm) H 5.69” (145mm) W 12.75” (324mm) D CLEARANCE FOR VENTILATION Top: Min. 0.375” (10mm) | Back: Min. 2” (50mm) WEIGHT 11 lbs (5.3 kg)

Bussiness Phone #   1- (647) -424-4353
Toll-Free # 1-(844) -893-3355
Cell # 1- (416) -893-3355
DSCN3087 2.JPG
google-badge.png
  • Facebook
info@k1audio.com
Richmond Hill, Ontario, Canada